drirshad
07-09 04:56 AM
LCA at 485 level should not be considered and that could be the reason u never heard of one .....
wallpaper Nicky Whelan 4
munshiviral
10-26 01:26 AM
Hi,
I am currently working on EAD and my Priority date is May 2007. I was wondering if I get a job in a US company which allows me to stay in india and work for them on regular employment under inter office transfer, Can i still work on EAD and be aligible for my GC?
Will there be any limit on how long can I work from out side of US, if I can?
is there any other legal formality i should fulfill in order to work for US company from out side of US and continue with my GC Process?
Any help is appriciated,
Thanks,
Mickey
I am currently working on EAD and my Priority date is May 2007. I was wondering if I get a job in a US company which allows me to stay in india and work for them on regular employment under inter office transfer, Can i still work on EAD and be aligible for my GC?
Will there be any limit on how long can I work from out side of US, if I can?
is there any other legal formality i should fulfill in order to work for US company from out side of US and continue with my GC Process?
Any help is appriciated,
Thanks,
Mickey
Dhundhun
06-21 03:49 PM
I came back to US on Mar 30 2008 using advance parole. The officer wrote on I-94 , paroled until Mar 29, 2008 (I am assuming its an oversight).
I didnt detect the oversight till yesterday. What my current status and what actions should I take to rectify the error.
I am still working for my employer that sponsored the H1B which is valid till Feb 2009, although the stamp on the passport was valid only till Feb 2008
Thanks
For I-485 Applicant, it is not of much significance.
At POE, AP is stamped for one year (with I-94), but when it expires, it does not matter. One can continue working on H1 or EAD. And if someone is in USA on H4 (and not working on EAD) also remains in vaild status.
So there should not be any reason to worry, however, as suggested by "kshitijnt" better to get in touch with USCIS and let them do corrective action as required.
Please post your experience afterwards.
I didnt detect the oversight till yesterday. What my current status and what actions should I take to rectify the error.
I am still working for my employer that sponsored the H1B which is valid till Feb 2009, although the stamp on the passport was valid only till Feb 2008
Thanks
For I-485 Applicant, it is not of much significance.
At POE, AP is stamped for one year (with I-94), but when it expires, it does not matter. One can continue working on H1 or EAD. And if someone is in USA on H4 (and not working on EAD) also remains in vaild status.
So there should not be any reason to worry, however, as suggested by "kshitijnt" better to get in touch with USCIS and let them do corrective action as required.
Please post your experience afterwards.
2011 nicky whelan photo 8
inder123
11-05 05:38 PM
Any one with july 3rd recvd date at NEBRASKA recvd AP?
Mine is July 2nd received date at Nebraska. I got my A/P just today. My attorney had no info about it. I got it directly.
Mine is July 2nd received date at Nebraska. I got my A/P just today. My attorney had no info about it. I got it directly.
more...
clockwork
07-18 05:03 PM
Enjoy! :) Only 5 files max allowed. Please follow up the next post.
vin13
06-02 04:06 PM
it is good if you can save some money. Make sure the print quality is good and meets the specifications.
We had our passport photos taken from Walgreens to file for AP. USCIS sent me an RFE requesting photos. I was not sure what was wrong the first time. I got the next set of photos done from the postoffice.
We did not take any shortcuts but still got an RFE for photos.
All i am saying is make sure you have good quality photos that meet the specs when you try doing it yourself.
We had our passport photos taken from Walgreens to file for AP. USCIS sent me an RFE requesting photos. I was not sure what was wrong the first time. I got the next set of photos done from the postoffice.
We did not take any shortcuts but still got an RFE for photos.
All i am saying is make sure you have good quality photos that meet the specs when you try doing it yourself.
more...
neeidd
10-09 06:04 PM
What is the secondary inspection about? Is it just sitting and waiting while they do some checks on our file or do we have to answer some questions? Please let me know
Thanks
Thanks
2010 /nicky-whelan-349.jpg
coopheal
11-06 06:51 AM
Bump
more...
haider420
03-04 01:01 AM
Mr Haider
Please give the entire facts of the case before asking for advise.
1. You said your I-140 is cleared, that means u might be working currently or did they apply as future employee
2. What does your master's have to do with your EB3 application? if you already filed in Eb3 and your date is current there is no point in waiting for completion of the masters and then filing in EB2. Either the attorney is drunk or you are not giving the entire information.
Please give all relevant info and hopefully somebody can guide you. If you feel your attorney is messing you up, you can file for your 485 by yourself if you company agrees.
either way we need more details to help you dude
- cheers
kris
i just found out after talking to USCIS that I have to wait till my PD is current which is probably going to be in another 10 years...:(
Please give the entire facts of the case before asking for advise.
1. You said your I-140 is cleared, that means u might be working currently or did they apply as future employee
2. What does your master's have to do with your EB3 application? if you already filed in Eb3 and your date is current there is no point in waiting for completion of the masters and then filing in EB2. Either the attorney is drunk or you are not giving the entire information.
Please give all relevant info and hopefully somebody can guide you. If you feel your attorney is messing you up, you can file for your 485 by yourself if you company agrees.
either way we need more details to help you dude
- cheers
kris
i just found out after talking to USCIS that I have to wait till my PD is current which is probably going to be in another 10 years...:(
hair Nicky Whelan Galleries
chanukya
02-20 10:50 PM
Yes it is positive --At-least senators are sticking to their timetable of CIR by March and April.
I guess that is the reason IV is asking for stories by Wednesday noon, This hearing is also on the same day.
Is this something positive, that can give us some hope? There hasn't been any good news for a long time.
I guess that is the reason IV is asking for stories by Wednesday noon, This hearing is also on the same day.
Is this something positive, that can give us some hope? There hasn't been any good news for a long time.
more...
sajimm
03-04 09:18 AM
This is going to impact lot of people.
Here is the link to the actual memo.
http://www.uscis.gov/files/nativedocuments/national-security-adjudication-reporting-020909.pdf
Here is the link to the actual memo.
http://www.uscis.gov/files/nativedocuments/national-security-adjudication-reporting-020909.pdf
hot Nikki Whelan | Babe Grotto
cubedflash
01-28 10:49 AM
PJ,
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
more...
house Nicky Whelan
nat23
02-13 08:29 AM
I just read about the Lifetime learning credit and it says even the taxpayer can claim upto 20% for $10,000 out of his pocket
tattoo Nicky Whelan :)
indyanguy
06-07 07:32 PM
any help?
more...
pictures of the day - Nicky Whelan
ivgclive
05-02 08:31 AM
I was on I-485 status on my EB3 application working on EAD. My I140 for Eb2 application got approved today while also requesting porting of priority date.
I believe USCIS would have automatically switched the 485 application to use the new EB2 I-140 instead of old EB3-I140
Now my question I am ready to renew my EAD. I wanted if there will be any problem with my EAD application since it is now transfered to an Eb2 position.
My pririty date is still not current....
EAD is based on a pending I-485, you should go ahead to renew your EAD (as you work in EAD, do not let it expire). Consult a lawyer, send additional documentation along with the package that you have done so-and-so transfer.
I believe USCIS would have automatically switched the 485 application to use the new EB2 I-140 instead of old EB3-I140
Now my question I am ready to renew my EAD. I wanted if there will be any problem with my EAD application since it is now transfered to an Eb2 position.
My pririty date is still not current....
EAD is based on a pending I-485, you should go ahead to renew your EAD (as you work in EAD, do not let it expire). Consult a lawyer, send additional documentation along with the package that you have done so-and-so transfer.
dresses Tags: nicky, nicky whelan,
seahawks
07-26 11:32 PM
For the experts on this board, my H1 expires on 9/30/07. Should I wait till after Aug. 17 to qualify for a 3-year extension?
jazz
if you qualified and filed for 485 depending on your PD, you most probably will get only 1 year extension. I just filed mine May 29th for 3 years and filed my 485 June 8th but when approved I got my H1 extension approved only for 1 year. I may be wrong, just referencing what my lawyer said..
jazz
if you qualified and filed for 485 depending on your PD, you most probably will get only 1 year extension. I just filed mine May 29th for 3 years and filed my 485 June 8th but when approved I got my H1 extension approved only for 1 year. I may be wrong, just referencing what my lawyer said..
more...
makeup nicky whelan photo 5
check_name
07-24 07:33 PM
thank you very much for the info.
I will check Joe Hohenstein out to see whether he is interested in my case!
- Joe Hohenstein's Law Firm Orlow & Orlow is in Philadelphia, and typically represents clients
in the Northeast. Joe can take individual emails at joe@orlow.com;
because there may be a lot of emails, please allow for a delay in the
response. If the questions are get to be more detailed, he would talk
about treating them as an initial consultation, which is $100.
http://immigrationvoice.org/forum/showthread.php?t=1088
I will check Joe Hohenstein out to see whether he is interested in my case!
- Joe Hohenstein's Law Firm Orlow & Orlow is in Philadelphia, and typically represents clients
in the Northeast. Joe can take individual emails at joe@orlow.com;
because there may be a lot of emails, please allow for a delay in the
response. If the questions are get to be more detailed, he would talk
about treating them as an initial consultation, which is $100.
http://immigrationvoice.org/forum/showthread.php?t=1088
girlfriend Nicky Whelan 6
logiclife
01-29 07:06 PM
Wow...wait a minute here.
He does not have the stamp in his passport for the new employer. If he has already quit his old employer for which he has the H1B stamp, then he probably must have a new stamp(for latest H1) for re-entering.
First of all, he would be using his new I-94 that is attached to the new H1 he just got from his new employer. So his departure record would show him working for new employer. When he comes back, if he doesnt have visa stamp for the new employer, then it would be a problem, I am pretty sure.
Better check with a lawyer newh1user. I am pretty sure you will need new H1 stamp that is tied to new I-797 if you exit USA and give your latest I-94 when leaving.
Also, think about getting an H1 stamp overseas in Europe while you are at this situation. If you have a bachelors or masters degree from United States, then getting H1 stamping in countries other than your home country is not a big challenge.
He does not have the stamp in his passport for the new employer. If he has already quit his old employer for which he has the H1B stamp, then he probably must have a new stamp(for latest H1) for re-entering.
First of all, he would be using his new I-94 that is attached to the new H1 he just got from his new employer. So his departure record would show him working for new employer. When he comes back, if he doesnt have visa stamp for the new employer, then it would be a problem, I am pretty sure.
Better check with a lawyer newh1user. I am pretty sure you will need new H1 stamp that is tied to new I-797 if you exit USA and give your latest I-94 when leaving.
Also, think about getting an H1 stamp overseas in Europe while you are at this situation. If you have a bachelors or masters degree from United States, then getting H1 stamping in countries other than your home country is not a big challenge.
hairstyles nicky whelan.
sparky63
November 21st, 2005, 11:41 AM
I agree that #2 is the sharpest, but I like #4 best. The smoke trails from his nose and mouth give the shot a little extra interest ... almost makes the smoke a second subject or character in the shot.
bijualex29
06-22 07:53 AM
I-485 can be rejected if filed with incomplete initial evidence.
Folks, it is the time for us to be more careful than even to make sure that our lawyer files I-485 correctly. With there mistake, we can really get screwed up. All they can say one word �Sorry�.
It happened to me while filing for H-1 extension, I got only one year extension, based on Labor pending whereas my I-140 was approved at that time, they refilled at no cost to me with 3 year extension.
Here in I-485, refilling will not be possible, since by the time we get the receipt notice, the date might have moved back already.
Folks, it is the time for us to be more careful than even to make sure that our lawyer files I-485 correctly. With there mistake, we can really get screwed up. All they can say one word �Sorry�.
It happened to me while filing for H-1 extension, I got only one year extension, based on Labor pending whereas my I-140 was approved at that time, they refilled at no cost to me with 3 year extension.
Here in I-485, refilling will not be possible, since by the time we get the receipt notice, the date might have moved back already.
lonedesi
04-04 10:08 PM
A friend of mine who has a bachelor's degree from India applied for her labor through PERM under EB2 category, which was approved. This was done based on the attorney's advice. Later, when the I-140 was to be submitted, the attorney advised that they should file I-140 under EB3 as the employee just had a bachelor's degree and he thought that they would get an RFE or will not probably be able to justify her qualifications for an EB2 category. At that time he also mentioned that, once the I-140 was approved, they could go ahead and submit I-485 application as though it was an EB2 case based on the approved labor. Now that I-140 is approved under EB3 category, he is going back on his words and telling that since I-140 was approved under EB3 category, they should file I-485 as though it is an EB3 application. There is a vast difference in priority dates between EB2 & EB3 categories and this is not helping the problem. Would it be okay to apply I-485 under EB2 category based on the approved labor (EB2) or should one apply I-485 under EB3 based on the approved I-140 (EB3)? Anyone who has had any experience or has any information in this regard, please advise. Or did the attorney mess up first time and he is finding an easy way to fix the problem by going the EB3 route? I sometimes wonder if these attornies really know what they are talking about or they just out there to make money at the expense of innocent people like us.
No comments:
Post a Comment